Sterco Butt Welding machines are designed and developed with outstanding dependability, exceptional accuracy for butt joining of wires/rods of mild steel, carbon steel, steel alloy copper, aluminium and brass etc. bringing together under pressure the ends of the parts to be welded and by applying short circuit current to the joints. The jaws of the machines are arranged in such a way so as to make possible the welding of wires over a considerably wide range of diameters of specially shaped cross section. Mechanical timer is provided in which it is automatically tripped, after the job is done. The welded joint can withstand high tensile, and can be drawn upto minimum size.
Transformer
The transformer of the machines is of special type, conforming to international standard specifications primary and secondary are of solid electrolytic copper of ample section, suitable for withstanding continuously temperature of 155°C. This transformer is fitted in a light welded framework.
Regulator
A regulator is provided on the primary side with 8 different stages to control the current according to the requirement.
Annealing
The same Jaws can be used for annealing with extended jaws.
Additional Facilities for annealing can be provided at extra cost.
Extended annealing jaws from 4" to 10"
Separate heat regulator for annealing with foot switch
Annealing time will be control automatically by providing an electronic timer.
Lighting lamp with flexible stand.
Technical Specifications
MODEL
R - 1
R - 2
R - 3
R - 4
R - 5
R - 6
R - 7
KVA
6
10
15
25
35
50
75
Input supply
220-240 Single phase two lines of three phase,
380/440 Volts two lines of three phase,
AC 50Hz
Max. Dia of wires weldable
Steel
5mm
8mm
10mm
12mm
15mm
19mm
22mm
Copper
4mm
5mm
6mm
8mm
10mm
12mm
14mm
Aluminium
5mm
8mm
10mm
12mm
15mm
19mm
22mm
Aluminium wires weldable steel
Steel
2mm
2.5mm
3mm
3mm
4mm
6mm
8mm
Copper
2mm
2.5mm
3mm
3mm
4mm
6mm
8mm
Aluminium
2.5mm
2.5mm
3mm
8mm
4mm
6mm
8mm
Nos. of adjusting
8 Taps
8
8
8
8
8
8
We reserve the right to change design and modify specifications at the discretion of our technical department.
Content on this page requires a newer version of Adobe Flash Player.